Economical and safe materials handling by Incline Conveyors

Incline Conveyors, like any other conveyor, serves the purpose of the movement of material. They are used as independent units to move material from one level to another, provided used with gravity conveyor, for continuous flow of material from one floor to another.  They are designed for permanent installation by using pre-designed sections.

The material can be moved forward as well as backward, in both directions. The reverse direction requires the help of the center drive. Incline Conveyors requires support at the top and bottom. The maximum recommended incline is 25º.  As they are inclined, a rough Top belt is used at the top.

In Incline Conveyor, the standard sections are combined to make any length required. They are normally equipped with NOSE OVER at the upper end, which enables the conveyed product to level off to a horizontal position before being discharged.  This is highly desirable for cartons carrying breakables. The nose over eliminates a dropping action by the front of the carton when it reaches the top. Generally, the carton should not exceed the overall width of the conveyor, but if it is wider it should have a flat bottom.

Incline belt conveyor

Neo Conveyors, keep in mind certain facts and factors before they go for incline conveyors. They believe in the satisfaction of their customers, along with, the requirement and logical facts, such as :

• The kind of material to be moved
• The angle of incline required
• Belt to be used to give perfect running
• Whether, it is a short or long load, as short ones are more vulnerable to toppling.
• The closer the rollers, the smoother is a ride for each load, avoiding bobbling and rocking, with the help of a slider bed.
• Right guidance and sorting the needs to be fulfilled.